Home Guitars Equipment & options Gallery Specifications Contact Kit Purchase Français


Standard semi service kit for classical guitar






OPTION (inquired)


Payment by PayPal

Contact me

Standard classical guitar kit with semi service

Two halves (book-matched) Engelman, Lutz Spruce or Western Red Cedar top, 2A grade, glued, sanded, rosette inlay and sound hole cut

Two halves (book-matched) Select grade Indian R.W., Spalted Maple or Black Walnut back, glued with back strip

Indian R.W., Black Walnut or Spalted maple sides, laminated, pre-bent, not profiled

Inside linings (4) pre-bent, thickness .180 " not glued (Spanish Cedar )

Bindings (4) purfling (4) pre-bent

Headpiece (1) and back veneer (2)
Back butt strip

Pre-slotted, indian RW fingerboard (firsrt grade), Scale 650 mm

Classical fret wire 18% nickel

Engelman, or Sitka Spruce for brace and harmonic bar

Spanish cedar wood for back braces

Cross-grain back center strip 19 x 7/8 x 1/8 "

Bridge,heel and hole patchs sand to .075 "

Neck,heel stack pieces and foot block not glued not shaped (spanish cedar) A grade

Indian rosewood bridge blank

Saddle,nut and tie block ( hard bones)

All the wood is quartersawn,air dried,currently a 10% moisture contents

Tuners are not included

Pictures are only for representation

Many woods has been used for pictures and they are only representative

Guitares Laramée, 295 route 143, St-François-du-Lac, J0G 1M0, T. : 450-568-5912    Email : guitareslaramee@gmail.com

     Guitares Laramée © 2015 All rights reserved - Classical guitars Web site design: CB Communications Web